| Usable floor area: | 202,26 m² |
| NET area: | 314,15 m² |
| Footprint area: | 179,26 m² |
| The minimum dimensions of the plot: | 22,50 • 25,40 m |
| Volume: | 1 127,00 m³ |
| Ridge height: | 10,32 m |
| The angle of the roof: | 45,00 ° |
| Energy consumption: | EUco = 24,07 kWh/(m²year) EP = 42,12 kWh/(m²year) |
Floor plans:
1. Basement - 51,49 m²
| 1.1 | Communication | 8,52 m² | |
| 1.2 | Utility Room | 3,89 m² | |
| 1.3 | Utility room, central heating | 11,67 m² | |
| 1.4 | Utility Room | 7,87 m² | |
| 1.5 | Garages | 19,54 m² |
2. Ground floor - 108,86 m² (146,07 m²)
| 2.1 | Vestibule | 8,54 m² | |
| 2.2 | Communication | 9,75 m² | |
| 2.3 | Living room, dining room | 50,21 m² | |
| 2.4 | Kitchen | 8,92 m² | |
| 2.5 | Utility Room | 2,84 m² | |
| 2.6 | Bathroom | 8,61 m² | |
| 2.7 | Utility Room | 2,94 m² | |
| 2.8 | Room | 14,60 m² | |
| 2.9 | Stairs | 2,45 m² | (4,55 m²) |
| 2.10 | Terrace | 12,24 m² | |
| 2.11 | Terrace | 3,90 m² | |
| 2.12 | Exit | 21,07 m² |
3. Attic - 93,40 m² (98,39 m²)
| 3.1 | Hall | 18,56 m² | (19,23 m²) |
| 3.2 | Room | 16,87 m² | (19,55 m²) |
| 3.3 | Room | 14,12 m² | (18,78 m²) |
| 3.4 | Room | 19,80 m² | |
| 3.5 | Closet | 3,15 m² | (5,25 m²) |
| 3.6 | Bathroom | 4,71 m² | (6,81 m²) |
| 3.7 | Closet | 3,00 m² | (4,25 m²) |
| 3.8 | Bathroom | 7,94 m² | (10,58 m²) |
| 3.9 | Stairs | 5,25 m² | |
| 3.10 | Balcony | 4,99 m² |
Plot:
Section:
Façade:
Technologies:
- Technology:
- energy-efficient house.
- External walls:
- Double layer cellular concrete wall or calcium-silicate-brickj thickness of 44 cm coefficient Uo = 0.12 - 0.14 W/m²K (24 cm brick wall + 20 cm styrofoam coefficient λ = 0.033 W/m²K )
- Foundations:
- Traditional reinforced concrete strip foundation, foundation walls from concrete blocks M6, floor on reinforced concrete slab supported by wall footings.
- Insulation from the ground: floors on hard waterproof styrofoam panels thickness of 20 cm; additional insulation of wall footings with the use of insulating blocks izomur.
- Interior walls:
- footings as above depending on the external wall technology used
- partition timber frame clad with gypsum sheathing panels
- Ceiling:
- Beam and block of Porotherm type.
- Roof construction:
- Carpentry made traditional wooden truss.
- Roofing:
- Cement or ceramic roof tiling.
- Stairs:
- Internal wooden stairs on wooden stringer beams. Ready bought stairs could be used according to the height and installed by a specialist company.
- Elevations:
- silicone or acrylic plaster,
- wall base finished with e.g. clinker tiles,
- wooden or plastered tops and inserts.
- Installations:
- heating and domestic hot water preparation: gas with the use of a condensing boiler
- central heating installations with use of "Purmo" systems
- installation of mechanical ventilation with recuperation
- optional ground heat exchanger
- bathroom floor heating - electric heating mat
- Thermal insulation:
- styrofoam wall insulation thickness of 20 cm
- floor insulation on styrofoam foundations thickness of 20 cm
- mineral wool roof insulation between (thickness of 20 cm) and below (thickness of 10 cm) the rafters and optional styrofoam roof elements as an extra layer of insulation
- window and door insulation - warm installation
- Chimneys:
- Schiedel technology.
- Windows and doors:
- PVC windows coefficient Uo = 0.6 W/m²K (glass), Uo = 0.96 - 1.0 W/m²K (frame), gn = 0.5
- sloped roof windows coefficient Uo = 0.5 W/m²K (glass), Uo = 0.94 W/m²K (frame), gn = 0.62
- exterior door whole coefficient Uo = 1.3 W/m²K
- garage door whole coefficient Uo = 1.3 W/m²K
- Note!
- This project includes a project of recuperation installation!
Estimated cost:
| Investment cost data* | |
| Raw closed state | 321 500 PLN |
| Finished state | 504 400 PLN |
| * Approximate pricing (net) . The Design Office provides projects only, and does not deal with the implementation of the investment. Detailed calculations should be provided by the contractor. We encourage you to familiarize yourself offers in this section Ready Houses | |
Investment cost data these are the estimated costs of development energy-efficient house.
They are the result of multiplying unit price indicators (€/m ²) by the surface of the house. The area of the house includes the garage and attic.
The raw closed state covers the following scope of work:
- earthworks
- foundation
- supporting walls
- chimneys, mechanical ventilation (recuperator, equipment)
- cieling and reinforced concrete elements
- roof structure
- roofing
- exterior windows and doors
To the state of the development are added:
- partitions
- plaster
- internal staircase
- elevation
- plumbing (without a battery and fittings)
- sewage system
- gas installation
- central heating
- electric installation
All prices are NET (excluding VAT) i zostały wyliczone przy założeniu realizacji budowy przez wynajęte firmy specjalistyczne. Jest to system tańszy niż zatrudnienie generalnego wykonawcy, ale wymaga poświęcenia czasu i uwagi inwestora na zintegrowanie poszczególnych prac. Koszty realizacji można dodatkowo obniżać budując dom systemem gospodarczym. Dane szacunkowe mogą różnic się od wartości wynikającej z kosztorysu gdyż nie uwzględniają szczególnych cech budynku, takich jak poziom jego skomplikowania. Do wyliczenia wskaźników przyjęto średnią stawkę robocizny oraz minimalne ceny materiałów wg wydawnictwa Sekocenbud.
A cost table is included with the project design.
Cost table It also contains an indicative value of the costs of individual works (earthworks, foundations, etc.), it is used to estimate the cost of the investment. It is appended to each project. This is a table containing indicators for unit prices for individual items. The unit in this case is 1 m ² the surface is calculated for room height above 190 cm.
This type of table is often required by banks when applying for a loan.
You can request a detailed cost estimate of the selected project.
Cost estimate jest szczegółowym wyliczeniem kosztów dla danego budynku. W oparciu o dane z projektu technicznego podaje zakres poszczególnych robót np. powierzchnie ścianek działowych, stropów, tynków; ilość betonu na fundamenty, stropy. Do kosztorysu jest dołączone szczegółowe zestawienie materiałów oraz tabela elementów scalonych. Do kosztorysu inwestorskiego przyjmowane są ceny materiałów oraz stawki robocizny wg wydawnictwa Sekocenbud. Kosztorys pozwala inwestorowi kontrolować koszty na każdym etapie robót pokazując ich zakres: nakłady na robociznę oraz ilości poszczególnych materiałów.
The cost estimate is included in the price 492,00 PLN gross, you can purchase it together with the project (for example, by selecting the appropriate option in the the order form) or independent - for this purpose contact us.
This offer applies only to ready projects.
See a sample cost estimate.
You can request a blind cost estimate of the selected project.
Blind cost estimate as an estimate of the investment is done for a specific project and contains a scope (consultation) of the work, together with a detailed bill of the materials, and does not contain rates. A cost estimate may be presented to business partners on the basis of preparing an offer.
Price 123,00 PLN gross. You can purchase it together with the project (for example, by selecting the appropriate option in the the order form) or independent - for this purpose contact us.
This offer applies only to ready projects.
See a sample blind cost estimate.
Are you interested and want to find out more about a project?
Feel free to contact us! Phone: +48 71 354 59 49, mobile: +48 883 909 409, e-mail biuro@lipinscy.pl.
We speak English, German, Russian, Polish.